D-Link DGS-1510/ME Series Reference Manual page 599

DGS-1510/ME Series Metro Ethernet Switch CLI Reference Guide
exclude - (Optional) Specifies to exclude lines that contain the specified filter string.
begin - (Optional) Specifies the first line that contains the specified filter string will be the first line of the output.
<filter_string 80> - Enter a filter string that is enclosed by the symbol ". Thus, the filter string itself cannot
contain the " character. The filter string is case sensitive. This value can be up to 80 characters long.
<filter_string 80> - (Optional) Enter a filter string that is enclosed by the symbol ". Thus, the filter string
itself cannot contain the " character. The filter string is case sensitive. This value can be up to 80
characters long.
<filter_string 80> - (Optional) Enter a filter string that is enclosed by the symbol ". Thus, the filter
string itself cannot contain the " character. The filter string is case sensitive. This value can be up
to 80 characters long.
include - (Optional) Specifies to include lines that contain the specified filter string.
exclude - (Optional) Specifies to exclude lines that contain the specified filter string.
begin - (Optional) Specifies the first line that contains the specified filter string will be the first line of the output.
<filter_string 80> - Enter a filter string that is enclosed by the symbol ". Thus, the filter string itself cannot
contain the " character. The filter string is case sensitive. This value can be up to 80 characters long.
<filter_string 80> - (Optional) Enter a filter string that is enclosed by the symbol ". Thus, the filter string
itself cannot contain the " character. The filter string is case sensitive. This value can be up to 80
characters long.
<filter_string 80> - (Optional) Enter a filter string that is enclosed by the symbol ". Thus, the filter
string itself cannot contain the " character. The filter string is case sensitive. This value can be up
to 80 characters long.
log_toTFTP - Specifies to upload a log file from device to TFTP server.
<ipaddr> - Enter the IP address of the TFTP server.
dest_file - Specifies to identify the parameter "path_filename".
<path_filename 64> - Enter the pathname specifies the pathname on the TFTP server. It can be a relative
pathname or an absolute pathname. This name can be up to 64 characters long.
attack_log_toTFTP - Specifies that the attack log will be uploaded to the TFTP server.
<ipaddr> - Enter the IP address of the TFTP server.
dest_file - Specifies to identify the parameter "path_filename".
<path_filename 64> - Enter the path name on the TFTP server to hold the attack log. This name can be up
to 64 characters long.
firmware_toTFTP - Specifies that the firmware file will be uploaded to the TFTP server.
<ipaddr> - Enter the IP address of the TFTP server.
dest_file - Specifies to identify the parameter "path_filename".
<path_filename 64> - Enter the pathname specifies the pathname on the TFTP server. It can be a relative
pathname or an absolute pathname. This name can be up to 64 characters long.
src_file - (Optional) Specifies to identify the parameter "path_filename".
<pathname 64> - Enter the pathname specifies an absolute pathname on the device file system. If
pathname is not specified, it refers to the boot_up image. This name can be up to 64 characters long.
cfg_toFTP - Specifies that the configuration file will be uploaded to the FTP server.
<ipaddr> - Enter the IP address of the FTP server.
tcp_port - Specifies the TCP port.
<tcp_port_number1-65535> - Enter a value between 1 and 65535.
dest_file - Specifies to identify the parameter "path_filename".
<path_filename 64> - Enter the pathname specifies the pathname on the FTP server. It can be a relative
pathname or an absolute pathname. This name can be up to 64 characters long.
ftp: - Specifies the FTP site.
<string user:password@ipaddr:tcpport/path_filename> - Enter the FTP directory.
src_file - (Optional) Specifies to identify the parameter "path_filename".
<pathname 64> - Enter the pathname specifies an absolute pathname on the device file system. If
pathname is not specified, it refers to the boot_up CFG file.
include - (Optional) Specifies to include lines that contain the specified filter string.
595