D-Link DGS-1510/ME Series Reference Manual page 366

DGS-1510/ME Series Metro Ethernet Switch CLI Reference Guide
Format
config mac_based_access_control authorization attributes {radius [enable | disable] | local [enable |
disable]}(1)
Parameters
radius - Specifies to enable or disable the RADIUS attributes.
enable - Specifies to enable the RADIUS attributes. The authorized attributes (for example VLAN, 802.1p
default priority, and ACL) assigned by the RADUIS server will be accepted if the global authorization status
is enabled. The is the default option.
disable - Specifies to disable the RADIUS attributes.
local - Specifies to enable or disable the local attributes.
enable - Specifies to enable the local attributes. The authorized attributes assigned by the local database will
be accepted if the global authorization status is enabled. The is the default option.
disable - Specifies to disable the local attributes.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
The following example will disable the configuration authorized from the local database:
DGS-1510-28XMP/ME:admin# config mac_based_access_control authorization attributes local
disable
Command: config mac_based_access_control authorization attributes local disable
Success.
DGS-1510-28XMP/ME:admin#
42-14 show mac_based_access_control
Description
This command is used to display the MAC-based Access Control setting.
Format
show mac_based_access_control {ports {<portlist>}}
Parameters
ports – (Optional) Specifies to display the MAC-based Access Control settings for a specific port or range of
ports.
<portlist> - (Optional) Enter a list of ports used for this configuration here.
If no parameter is specified, the global MAC-based Access Control settings will be displayed.
Restrictions
None.
362