D-Link DGS-1510/ME Series Reference Manual page 29

DGS-1510/ME Series Metro Ethernet Switch CLI Reference Guide
Example
To remove VLANs from 10-30:
DGS-1510-28XMP/ME:admin# delete vlan vlanid 10-30
Command: delete vlan vlanid 10-30
Success.
DGS-1510-28XMP/ME:admin#
3-5 config vlan
Description
This command is used to configure a VLAN based on the name.
Format
config vlan <vlan_name 32> {[add [tagged | untagged | forbidden] | delete] <portlist> | advertisement
[enable | disable]}(1)
Parameters
<vlan_name 32> - Enter the VLAN name you want to add ports to. This name can be up to 32 characters long.
add - Specifies to add tagged, untagged or forbidden ports to the VLAN.
tagged - Specifies the additional ports as tagged.
untagged - Specifies the additional ports as untagged.
forbidden - Specifies the additional ports as forbidden.
delete - Specifies to delete ports from the VLAN.
<portlist> - Enter the list of ports used for the configuration here.
advertisement - Specifies the GVRP state of this VLAN.
enable - Specifies to enable advertisement for this VLAN.
disable - Specifies to disable advertisement for this VLAN.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To add 4 through 8 as tagged ports to the VLAN v2:
DGS-1510-28XMP/ME:admin# config vlan v2 add tagged 4-8
Command: config vlan v2 add tagged 4-8
Success.
DGS-1510-28XMP/ME:admin#
25