D-Link DGS-1510/ME Series Reference Manual page 73

DGS-1510/ME Series Metro Ethernet Switch CLI Reference Guide
Example
To configure the amount of time waiting or user input to be 60 seconds:
DGS-1510-28XMP/ME:admin# config authen parameter response_timeout 60
Command: config authen parameter response_timeout 60
Success.
DGS-1510-28XMP/ME:admin#
5-25 config authen parameter attempt
Description
This command is used to configure the maximum attempts for user's trying to login or promote the privilege on
console, telnet, SSH application.
Format
config authen parameter attempt <int 1-255>
Parameters
<int 1-255> - Enter the amount of attempts for user's trying to login or promote the privilege on console or telnet
or SSH. This value must be between 1 and 255. Default value is 3.
Restrictions
Only Administrators can issue this command.
Example
To configure the maximum attempts for user's trying to login or promote the privilege to be 9:
DGS-1510-28XMP/ME:admin# config authen parameter attempt 9
Command: config authen parameter attempt 9
Success.
DGS-1510-28XMP/ME:admin#
5-26 show authen parameter
Description
This command is used to display the parameters of authentication.
Format
show authen parameter
69