D-Link DGS-1510/ME Series Reference Manual page 422

DGS-1510/ME Series Metro Ethernet Switch CLI Reference Guide
DGS-1510-28XMP/ME:admin# config igmp_snooping multicast_vlan_group v1 add profile_name
channel_1
Command: config igmp_snooping multicast_vlan_group v1 add profile_name channel_1
Success.
DGS-1510-28XMP/ME:admin#
48-8 show igmp_snooping multicast_vlan_group
Description
This command is used to show an IGMP snooping multicast VLAN group.
Format
show igmp_snooping multicast_vlan_group {<vlan_name 32>}
Parameters
<vlan_name 32> - (Optional) Enter the VLAN name here. The VLAN name can be up to 32 characters long.
Restrictions
None.
Example
To show all IGMP snooping multicast VLAN groups setup on the Switch:
DGS-1510-28XMP/ME:admin# show igmp_snooping multicast_vlan_group
Command: show igmp_snooping multicast_vlan_group
VLAN Name
-------------------------------
mv1
DGS-1510-28XMP/ME:admin#
48-9 delete igmp_snooping multicast_vlan
Description
This command is used to delete an IGMP snooping multicast VLAN.
Format
delete igmp_snooping multicast_vlan <vlan_name 32>
VLAN ID Multicast Group Profiles
------- ---------------------------------
2 test
418