D-Link DGS-1510/ME Series Reference Manual page 452

DGS-1510/ME Series Metro Ethernet Switch CLI Reference Guide
DGS-1510-28XMP/ME:admin# config ethernet_oam ports 1 link_monitor error_frame_seconds
threshold 2 window 10000 notify_state enable
Command: config ethernet_oam ports 1 link_monitor error_frame_seconds threshold 2 window
10000 notify_state enable
Success.
DGS-1510-28XMP/ME:admin#
To configure the error frame threshold to10 and period to 1000000 ms for port 1:
DGS-1510-28XMP/ME:admin# config ethernet_oam ports 1 link_monitor error_frame_period
threshold 10 window 1000000 notify_state enable
Command: config ethernet_oam ports 1 link_monitor error_frame_period threshold 10 window
1000000 notify_state enable
Success.
DGS-1510-28XMP/ME:admin#
To configure a dying gasp event for port 1:
DGS-1510-28XMP/ME:admin# config ethernet_oam ports 1 critical_link_event dying_gasp
notify_state enable
Command: config ethernet_oam ports 1 critical_link_event dying_gasp notify_state enable
Success.
DGS-1510-28XMP/ME:admin#
To start remote loopback on port 1:
DGS-1510-28XMP/ME:admin# config ethernet_oam ports 1 remote_loopback start
Command: config ethernet_oam ports 1 remote_loopback start
Success.
DGS-1510-28XMP/ME:admin#
To configure the method of processing the received remote loopback command as "process" on port 1:
DGS-1510-28XMP/ME:admin# config ethernet_oam ports 1 received_remote_loopback process
Command: config ethernet_oam ports 1 received_remote_loopback process
Success.
DGS-1510-28XMP/ME:admin#
448