D-Link DGS-1510/ME Series Reference Manual page 523

DGS-1510/ME Series Metro Ethernet Switch CLI Reference Guide
DGS-1510-28XMP/ME:admin# show ssh algorithm
Command: show ssh algorithm
Encryption Algorithm
--------------------------
3DES : Enabled
AES128 : Enabled
AES192 : Enabled
AES256 : Enabled
Arcfour : Enabled
Blowfish : Enabled
Cast128 : Enabled
Twofish128 : Enabled
Twofish192 : Enabled
Twofish256 : Enabled
Data Integrity Algorithm
--------------------------
MD5 : Enabled
SHA1 : Enabled
Public Key Algorithm
--------------------------
RSA : Enabled
DSA : Enabled
DGS-1510-28XMP/ME:admin#
63-3 config ssh authmode
Description
This command is used to configure user authentication method for SSH.
Format
config ssh authmode [password | publickey | hostbased] [enable | disable]
Parameters
password - Specifies user authentication method as password.
publickey - Specifies user authentication method as public key.
hostbased - Specifies user authentication method as host-based..
enable - Specifies to enable user authentication method.
disable - Specifies to disable user authentication method.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
519