D-Link DGS-1510/ME Series Reference Manual page 418

DGS-1510/ME Series Metro Ethernet Switch CLI Reference Guide
same multicast VLAN.
<portlist> - Enter the list of ports to be configured here.
tag_member_port - Specifies the port or range of ports that will become tagged members of the multicast VLAN.
<portlist> - Enter the list of ports to be configured here.
state - Specifies to enable or disable the multicast VLAN for a chosen VLAN.
enable - Specifies to enable the multicast VLAN for a chosen VLAN.
disable - Specifies to disable the multicast VLAN for a chosen VLAN.
replace_source_ip - Specifies that the source IP address in the join packet must be replaced by this IP address
before forwarding the report packet sent by the host. If 0.0.0.0 is specified, the source IP address will not be
replaced.
<ipaddr> - Enter the replace source IP address here.
remap_priority - Specifies the remap priority value to be associated with the data traffic to be forwarded on the
multicast VLAN. If none is specified, the packet's original priority is used. The default setting is none.
<value 0-7> - Enter the remap priority value here. This value must be between 0 and 7.
none - Specifies that the remap priority value will be set to none.
replace_priority - (Optional) Specifies that the packet priority will be changed to the remap_priority, but only if
remap_priority is set.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To configure an IGMP snooping multicast VLAN with the name "mv1", make ports 1 and 3 members of the VLAN,
and set the state to enable:
DGS-1510-28XMP/ME:admin# config igmp_snooping multicast_vlan mv1 add member_port 1,3 state
enable
Command: config igmp_snooping multicast_vlan mv1 add member_port 1,3 state enable
Success.
DGS-1510-28XMP/ME:admin#
48-3 create igmp_snooping multicast_vlan_group_profile
Description
This command is used to create an IGMP snooping multicast group profile on the Switch.
Format
create igmp_snooping multicast_vlan_group_profile <profile_name 1-32>
Parameters
<profile_name 1-32> - Enter the multicast VLAN group profile name here. The name can be up to 32 characters
long.
414