Config 802.1X Capability Ports [<Portlist> | All] [Authenticator | None] - D-Link DGS-1510/ME Series Reference Manual

DGS-1510/ME Series Metro Ethernet Switch CLI Reference Guide
DGS-1510-28XMP/ME:admin# show 802.1x auth_configuration ports 1
Command: show 802.1x auth_configuration ports 1
Port Number : 1
Capability : None
AdminCrlDir : Both
OpenCrlDir : Both
Port Control : Auto
QuietPeriod : 60
TxPeriod : 30
SuppTimeout : 30
ServerTimeout : 30
MaxReq : 2
ReAuthPeriod : 3600
ReAuthenticate : Disabled
Forward EAPOL PDU On Port : Enabled
Max User On Port : 16
CTRL+C ESC q Quit
4-11 config 802.1x capability ports
Description
This command is used to configure the port capability.
Format
config 802.1x capability ports [<portlist> | all] [authenticator | none]
Parameters
<portlist> - Enter the list of ports used for the configuration here.
all - Specifies all ports to be configured.
authenticator - Specifies the port that wishes to enforce authentication before allowing access to services that
are accessible via that port adopts the authenticator role.
none - Specifies to disable authentication on the specified ports.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To configure the port capability:
sec
sec
sec
sec
times
sec
SPACE n Next Page p Previous Page r Refresh
43