Show Snmp View - D-Link DGS-1510/ME Series Reference Manual

DGS-1510/ME Series Metro Ethernet Switch CLI Reference Guide

67-12 show snmp view

Description
This command is used to display the SNMP view record.
Format
show snmp view {<view_name 32>}
Parameters
<view_name 32> - (Optional) Enter the view name here. The name can be up to 32 characters long.
Restrictions
None.
Example
To show SNMP view:
DGS-1510-28XMP/ME:admin# show snmp view
Command: show snmp view
Vacm View Table Settings
View Name
---------------------
view123
restricted
restricted
restricted
restricted
restricted
CommunityView
CommunityView
CommunityView
Total Entries: 9
DGS-1510-28XMP/ME:admin#
67-13 create snmp host
Description
This command is used to create a recipient of an SNMP trap operation.
Format
create snmp host <ipaddr> [v1 | v2c | v3 [noauth_nopriv | auth_nopriv | auth_priv]] <auth_string32>
Subtree
------------------------
1.3.6
1.3.6.1.2.1.1
1.3.6.1.2.1.11
1.3.6.1.6.3.10.2.1
1.3.6.1.6.3.11.2.1
1.3.6.1.6.3.15.1.1
1
1.3.6.1.6.3
1.3.6.1.6.3.1
View Type
----------
Included
Included
Included
Included
Included
Included
Included
Excluded
Included
549