D-Link DGS-1510/ME Series Reference Manual page 211

DGS-1510/ME Series Metro Ethernet Switch CLI Reference Guide
To configure the port 25's receive power threshold:
DGS-1510-28XMP/ME:admin# config ddm ports 25 rx_power_threshold high_alarm 4.55 low_alarm
0.01 high_warning 3.5 low_warning 0.03
Command: config ddm ports 25 rx_power_threshold high_alarm 4.55 low_alarm 0.01 high_warning
3.5 low_warning 0.03
Success.
DGS-1510-28XMP/ME:admin#
To configure the port 25's actions associate with the alarm:
DGS-1510-28XMP/ME:admin# config ddm ports 25 state enable shutdown alarm
Command: config ddm ports 25 state enable shutdown alarm
Success.
DGS-1510-28XMP/ME:admin#
22-3 show ddm
Description
This command is used to display the DDM global settings.
Format
show ddm
Parameters
None.
Restrictions
None.
Example
To display the DDM global settings:
DGS-1510-28XMP/ME:admin# show ddm
Command: show ddm
DDM Log
DDM Trap
DGS-1510-28XMP/ME:admin#
:Enabled
:Disabled
207