D-Link DGS-1510/ME Series Reference Manual page 407

DGS-1510/ME Series Metro Ethernet Switch CLI Reference Guide
Format
config mcast_filter_profile ipv6 [profile_id <value 1-24> | profile_name <name 1-32> ] {profile_name <name
1-32> | [add | delete] <mcastv6_address_list>}(1)
Parameters
profile_id - Specifies the ID of the profile.
<value 1-24> - Enter the profile ID value here. This value must be between 1 and 24.
profile_name - Specifies a meaningful description for the profile.
<name 1-32> - Enter the profile name here. The profile name can be up to 32 characters long.
profile_name - Specifies a meaningful description for the profile.
<name 1-32> - Enter the profile name here. The profile name can be up to 32 characters long.
add - Specifies to add an IPv6 multicast address.
delete - Specifies to delete an IPv6 multicast address.
<mcastv6_address_list> - Enter a list of the IPv6 multicast addresses to put in the profile. You can either specify
a single IPv6 multicast IP address or a range of IPv6 multicast addresses connected by '-'.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To add the IPv6 multicast address range FFF0E::100:0:0:20 – FFF0E::100:0:0:22 to profile ID 3:
DGS-1510-28XMP/ME:admin# config mcast_filter_profile ipv6 profile_id 3 add FF0E::100:0:0:20–
FFF0E::100:0:0:22
Command: config mcast_filter_profile ipv6 profile_id 3 add FF0E::100:0:0:20–
FFF0E::100:0:0:22
Success.
DGS-1510-28XMP/ME:admin#
47-4 delete mcast_filter_profile
Description
This command is used to delete a multicast address profile. If the IPv4 or IPv6 option is not specified, IPv4 is
implied.
Format
delete mcast_filter_profile {[ipv4 | ipv6]} [profile_id [<value 1-24> | all] | profile_name <name 1-32>]
Parameters
ipv4 - (Optional) Specifies to delete an IPv4 multicast profile.
ipv6 - (Optional) Specifies to delete an IPv6 multicast profile.
403