D-Link DGS-1510/ME Series Reference Manual page 426

Chapter 49 Multiple Spanning Tree Protocol
enable stp
disable stp
config stp {maxage <value 6-40> | maxhops <value 6-40> | hellotime <value 1-2> | forwarddelay <value 4-30> |
txholdcount <value 1-10> | fbpdu [enable | disable] | nni_bpdu_addr [dot1d | dot1ad]}
show stp
create stp instance_id <value 1-7>
config stp instance_id <value 1-7> [add_vlan | remove_vlan] <vidlist>
delete stp instance_id <value 1-7>
config stp mst_config_id {revision_level <int 0-65535> | name <string>}
show stp mst_config_id
config stp mst_ports <portlist> instance_id <value 0-7> { internalCost [auto | <value 1-200000000>] | priority
<value 0-240>}
config stp ports <portlist> {externalCost [auto | <value 1-200000000>] | hellotime <value 1-2> | migrate [yes | no]
|edge [true | false | auto] | p2p [true | false | auto] | state [enable | disable] | restricted_role [true | false] |
restricted_tcn [true | false] | fbpdu [enable | disable]}
show stp ports {<portlist>}
config stp priority <value 0-61440> instance_id <value 0-7>
config stp version [mstp | rstp | stp]
show stp instance {<value 0-7>}
49-1 enable stp
Description
This command is used to enable STP globally.
Format
enable stp
Parameters
None.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To enable STP:
DGS-1510/ME Series Metro Ethernet Switch CLI Reference Guide
(MSTP) Command List
422