D-Link DGS-1510/ME Series Reference Manual page 97

DGS-1510/ME Series Metro Ethernet Switch CLI Reference Guide
DGS-1510-28XMP/ME:admin# config arpentry 10.48.74.121 00-50-BA-00-07-37
Command: config arpentry 10.48.74.121 00-50-BA-00-07-37
Success.
DGS-1510-28XMP/ME:admin#
7-4 config arp_aging time
Description
This command is used to set the maximum amount of time, in minutes, that a dynamic ARP entry can remain in the
Switch's ARP table, without being accessed, before it is dropped from the table.
Format
config arp_aging time <value 0-65535>
Parameters
<value 0-65535>- Enter the ARP age-out time, in minutes. This value must be between 0 and 65535 minutes.
The default value is 20.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To configure ARP aging time to 30 minutes:
DGS-1510-28XMP/ME:admin# config arp_aging time 30
Command: config arp_aging time 30
Success.
DGS-1510-28XMP/ME:admin#
7-5 clear arptable
Description
This command is used to clear all the dynamic entries from ARP table.
Format
clear arptable
Parameters
None.
93