D-Link DGS-1510/ME Series Reference Manual page 195

DGS-1510/ME Series Metro Ethernet Switch CLI Reference Guide
20-8 enable dhcp_relay
Description
This command is used to enable the DHCP relay function on the Switch.
Format
enable dhcp_relay
Parameters
None.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To enable the DHCP relay function.
DGS-1510-28XMP/ME:admin# enable dhcp_relay
Command: enable dhcp_relay
Success.
DGS-1510-28XMP/ME:admin#
20-9 disable dhcp_relay
Description
This command is used to disable the DHCP relay function on the Switch.
Format
disable dhcp_relay
Parameters
None.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To disable the DHCP relay function:
191