Click the Start button to initiate the Ping Test.
After clicking the Start button, the following page will appear:
Click the Stop button to halt the Ping Test.
Click the Resume button to resume the Ping Test.
Trace Route
The trace route page allows the user to trace a route between the switch and a given host on the network.
To view this window, click Monitoring > Trace Route as shown below:
The fields that can be configured are described below:
Parameter
IPv4 Address
IPv6 Address
TTL (1-60)
xStack® DES-3200 Series Layer 2 Managed Fast Ethernet Switch
destination. If the packet fails to find the IP address in this specified time, the Ping
packet will be dropped.
Figure 11-18 Ping Test Result window
Figure 11-19 Trace Route window
Description
IP address of the destination station.
IPv6 address of the destination station.
The time to live value of the trace route request. This is the maximum number of
routers that a trace route packet can pass. The trace route option will cross while
seeking the network path between two devices.
The range for the TTL is 1 to 60 hops.
269