D-Link DGS-1510/ME Series Reference Manual page 525

DGS-1510/ME Series Metro Ethernet Switch CLI Reference Guide
Parameters
<username 15> - Enter the user name used here. This name can be up to 15 characters long.
automode - Specifies user authentication method.
hostbased - Specifies as host-based method.
hostname - Specifies host domain name.
<domain_name 32> - Enter the domain name here. This name can be up to 32 characters long.
hostname_IP - Specifies host domain name and IP address.
<domain_name 32> - Enter host name if configuring Host-based method.
<ipaddr> - Enter the host IP address.
password - Specifies user authentication method.
publickey - Specifies user authentication method.
Restrictions
Only Administrators can issue this command.
Example
To update user "test" authentication method:
DGS-1510-28XMP/ME:admin# config ssh user test authmode publickey
Command: config ssh user test authmode publickey
Success.
DGS-1510-28XMP/ME:admin#
63-6 show ssh user
Description
This command is used to show the SSH user information.
Format
show ssh user authmode
Parameters
None.
Restrictions
Only Administrators can issue this command.
Example
To show user information about SSH configuration:
521