D-Link DGS-1510/ME Series Reference Manual page 194

DGS-1510/ME Series Metro Ethernet Switch CLI Reference Guide
DGS-1510-28XMP/ME:admin# config dhcp_relay option_82 state enable
Command: config dhcp_relay option_82 state enable
Success.
DGS-1510-28XMP/ME:admin# config dhcp_relay option_82 check disable
Command: config dhcp_relay option_82 check disable
Success.
DGS-1510-28XMP/ME:admin# config dhcp_relay option_82 policy replace
Command: config dhcp_relay option_82 policy replace
Success.
DGS-1510-28XMP/ME:admin# config dhcp_relay option_82 remote_id user_define "D-Link L2 Switch"
Command: config dhcp_relay option_82 remote_id user_define "D-Link L2 Switch"
Success.
DGS-1510-28XMP/ME:admin#
20-7 config dhcp_relay option_82 circuit_id
Description
This command is used to configure the circuit id of DHCP relay agent information option 82 of the Switch.
Format
config dhcp_relay option_82 circuit_id [default | vendor1]
Parameters
default – Specifies the circuit id of DHCP relay agent to default.
vendor1 - Specifies the circuit id of DHCP relay agent to vendor1.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To configure the circuit ID as default:
DGS-1510-28XMP/ME:admin# config dhcp_relay option_82 circuit_id default
Command: config dhcp_relay option_82 circuit_id default
Success.
DGS-1510-28XMP/ME:admin#
190