D-Link DGS-1510/ME Series Reference Manual page 499

DGS-1510/ME Series Metro Ethernet Switch CLI Reference Guide
60-9 config 802.1p user_priority
Description
This command is used to map the 802.1p user priority of an incoming packet to one of the eight hardware queues
available on the Switch.
Format
config 802.1p user_priority <priority 0-7> <class_id 0-7>
Parameters
<priority 0-7> - Enter the 802.1p user priority you want to associate with the <class_id 0-7> (the number of the
hardware queue) with.
<class_id 0-7> - Enter the number of the Switch's hardware priority queue. The switch has 8 hardware priority
queues available. They are numbered between 0 (the lowest priority) and 7 (the highest priority).
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To configure the 802.1p user priority:
DGS-1510-28XMP/ME:admin# config 802.1p user_priority 1 3
Command: config 802.1p user_priority 1 3
Success.
DGS-1510-28XMP/ME:admin#
60-10 show 802.1p user_priority
Description
This command is used to display 802.1p user priority for ports.
Format
show 802.1p user_priority
Parameters
None.
Restrictions
None.
Example
To display the 802.1p user priority:
495