D-Link DGS-1510/ME Series Reference Manual page 531

DGS-1510/ME Series Metro Ethernet Switch CLI Reference Guide
To enable SSL:
DGS-1510-28XMP/ME:admin# enable ssl
Command: enable ssl
Success.
DGS-1510-28XMP/ME:admin#
64-3 disable ssl
Description
This command is used to disable SSL feature and supported cipher suites. To disable the status of one specific
cipher suite, user must specify it in this command.
Format
disable ssl {ciphersuite {RSA_with_RC4_128_MD5 | RSA_with_3DES_EDE_CBC_SHA |
DHE_DSS_with_3DES_EDE_CBC_SHA | RSA_EXPORT_with_RC4_40_MD5}}
Parameters
ciphersuite - (Optional) Specifies the cipher suite combination used for this configuration.
RSA_with_RC4_128_MD5 - Specifies RSA key exchange with RC4 128 bits encryption and MD5 hash.
RSA_with_3DES_EDE_CBC_SHA - Specifies RSA key exchange with 3DES_EDE_CBC encryption and SHA
hash.
DHE_DSS_with_3DES_EDE_CBC_SHA - Specifies DH key exchange with 3DES_EDE_CBC encryption and
SHA hash.
RSA_EXPORT_with_RC4_40_MD5 - Specifies RSA_EXPORT key exchange with RC4 40 bits encryption
and MD5 hash.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To disable SSL ciphersuite for RSA_with_RC4_128_MD5:
DGS-1510-28XMP/ME:admin# disable ssl ciphersuite RSA_with_RC4_128_MD5
Command: disable ssl ciphersuite RSA_with_RC4_128_MD5
Success.
DGS-1510-28XMP/ME:admin#
To disable SSL:
527