Show 802.1X {[Auth_State | Auth_Configuration] Ports {<Portlist - D-Link DGS-1510/ME Series Reference Manual

DGS-1510/ME Series Metro Ethernet Switch CLI Reference Guide
DGS-1510-28XMP/ME:admin# config 802.1x authorization attributes radius disable
Command: config 802.1x authorization attributes radius disable
Success.
DGS-1510-28XMP/ME:admin#
4-10 show 802.1x
Description
This command is used to display the 802.1X state or configurations. If no parameter is specified, the 802.1X
system configurations will be displayed.
Format
show 802.1x {[auth_state | auth_configuration] ports {<portlist>}}
Parameters
auth_state - (Optional) Specifies to display 802.1X authentication state machine of some or all ports
auth_configuration - (Optional) Specifies to display 802.1X configurations of some or all ports.
port - (Optional) Specifies a range of ports to be displayed. If no port is specified, all ports will be displayed.
<portlist> - Enter the list of ports used for the configuration here.
Restrictions
None.
Example
To display the 802.1X port level configurations:
42