D-Link DGS-1510/ME Series Reference Manual page 145

Table of Contents

Advertisement

DGS-1510/ME Series Metro Ethernet Switch CLI Reference Guide
Format
create cfm mep <string 32> mepid <int 1-8191> md [<string 22> | md_index <uint 1-4294967295>] ma
[<string 22> | ma_index <uint 1-4294967295>] direction [inward | outward] port <port>
Parameters
<string 32> - Enter the MEP name used. It is unique among all MEPs configured on the device. This name can
be up to 32 characters long.
mepid - Specifies the MEP ID. It should be configured in the MA's MEPID list.
<int 1-8191> - Enter the MEP ID used here. This value must be between 1 and 8191.
md - Specifies the maintenance domain name.
<string 22> - Enter the maintenance domain name used here. This name can be up to 22 characters long.
md_index - Specifies the maintenance domain index.
<uint 1-4294967295> - Enter the maintenance domain index value here. This value must be between 1
and 4294967295.
ma - Specifies the maintenance association name.
<string 22> - Enter the maintenance association name used here. This name can be up to 22 characters long.
ma_index - Specifies the maintenance association index.
<uint 1-4294967295> - Enter the maintenance association index value here. This value must be between 1
and 4294967295.
direction - Specifies the MEP direction.
inward - Specifies the inward facing (up) MEP.
outward - Specifies the outward facing (down) MEP.
port - Specifies the port number. This port should be a member of the MA's associated VLAN.
<port> - Enter the port number used here.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To create a CFM MEP:
DGS-1510-28XMP/ME:admin# create cfm mep mep1 mepid 1 md op_domain ma op1 direction inward
port 2
Command: create cfm mep mep1 mepid 1 md op_domain ma op1 direction inward port 2
Success.
DGS-1510-28XMP/ME:admin#
16-6
config cfm mep
Description
This command is used to configure the parameters of an MEP.
An MEP may generate 5 types of Fault Alarms, as shown below by their priorities from high to low:
Cross-connect CCM Received: priority 5
141

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents