D-Link DGS-1510/ME Series Reference Manual page 157

DGS-1510/ME Series Metro Ethernet Switch CLI Reference Guide
DGS-1510-28XMP/ME:admin# cfm loopback 32-00-70-89-31-06 mepname mep1
Command: cfm loopback 32-00-70-89-31-06 mepname mep1
Reply from 32-00-70-89-31-06: bytes=0 time=50ms
Reply from 32-00-70-89-31-06: bytes=0 time=50ms
Reply from 32-00-70-89-31-06: bytes=0 time=50ms
Reply from 32-00-70-89-31-06: bytes=0 time=50ms
CFM loopback statistics for 32-00-70-89-31-06:
Packets: Sent=4, Received=4, Lost=0(0% loss).
DGS-1510-28XMP/ME:admin# "
16-18 cfm linktrace
Description
This command is used to issue a CFM link track message.
Format
cfm linktrace <macaddr> [mepname <string 32> | mepid <int 1-8191> md [<string 22> | md_index <uint 1-
4294967295>] ma [<string 22> | ma_index <uint 1-4294967295>]] {ttl <int 2-255> | pdu_priority <int 0-7>}
Parameters
<macaddr> - Specifies the destination MAC address.
mepname - Specifies the MEP name used.
<string 32> - Enter the MEP name used here. This name can be up to 32 characters long.
mepid - Specifies the MEP ID used.
<int 1-8191> - Enter the MEP ID used here. This value must be between 1 and 8191.
md - Specifies the maintenance domain name.
<string 22> - Enter the maintenance domain name her. This name can be up to 22 characters long.
md_index - Specifies the maintenance domain index.
<uint 1-4294967295> - Enter the maintenance domain index value here. This value can be between 1
and 4294967295.
ma - Specifies the maintenance association name.
<string 22> - Enter the maintenance association name her. This name can be up to 22 characters long.
ma_index - Specifies the maintenance association index.
<uint 1-4294967295> - Enter the maintenance association index value here. This value can be between
1 and 4294967295.
ttl - (Optional) Specifies the link trace message TTL value. The default value is 64.
<int 2-255> - Enter the link trace message TTL value here. This value must be between 2 and 255.
pdu_priority - (Optional) Specifies the 802.1p priority to be set in the transmitted LTM. If not specified, it uses the
same priority as CCMs sent by the MA.
<int 0-7> - Enter the PDU priority value here. This value must be between 0 and 7.
Restrictions
None.
153