D-Link DGS-1510/ME Series Reference Manual page 352

DGS-1510/ME Series Metro Ethernet Switch CLI Reference Guide
Parameters
None.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To disable MAC notification function:
DGS-1510-28XMP/ME:admin# disable mac_notification
Command: disable mac_notification
Success.
DGS-1510-28XMP/ME:admin#
41-3 config mac_notification
Description
This command is used to configure the Switch's MAC address table notification global settings.
Format
config mac_notification {interval <sec 1-2147483647> | historysize <int 1-500>}
Parameters
interval - (Optional) Specifies the time in seconds between notifications.
<sec 1-2147483647> - Enter the interval time here. This value must be between 1 and 2147483647 seconds.
historysize - (Optional) Specifies the maximum number of entries listed in the history log used for notification. Up
to 500 entries can be specified.
<int 1-500> - Enter the history log size here. This value must be between 1 and 500.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To configure the Switch's Mac address table notification global settings:
DGS-1510-28XMP/ME:admin# config mac_notification interval 1 historysize 500
Command: config mac_notification interval 1 historysize 500
Success.
DGS-1510-28XMP/ME:admin#
348