D-Link DGS-1510/ME Series Reference Manual page 493

DGS-1510/ME Series Metro Ethernet Switch CLI Reference Guide
Restrictions
None.
Example
To display port bandwidth control table:
DGS-1510-28XMP/ME:admin# show bandwidth_control 1-10
Command: show bandwidth_control 1-10
Bandwidth Control Table
Port RX Rate
(Kbit/sec)
----- ----------
1 No Limit
2 No Limit
3 No Limit
4 No Limit
5 No Limit
6 No Limit
7 No Limit
8 No Limit
9 No Limit
10 No Limit
DGS-1510-28XMP/ME:admin#
60-3 config per_queue bandwidth_control
Description
This command is used to configure per port CoS bandwidth control.
Format
config per_queue bandwidth_control {ports [<portlist> | all ]} <cos_id_list 0-7> {{min_rate [no_limit | <value
64-10240000>]} max_rate [no_limit | <value 64-10240000>]}(1)
Parameters
ports - (Optional) Specifies a range of ports to be configured. If not specified, all ports will be configured.
<portlist> - Enter the list of ports used for this configuration here.
all - Specifies that all the ports will be used for this configuration.
<cos_id_list 0-7> - Specifies a list of priority queues. The priority queue number is ranged from 0 to 7.
min_rate - (Optional) Specifies the minimum rate at which the above specified class will be allowed to receive
packets.
no_limit - Specifies that there will be no limit on the rate of packets received by the above specified class.
<value 64-10240000> - Specifies the packet limit, in Kbps, that the above ports will be allowed to receive. If
the specified rate is not multiple of minimum granularity, the rate will be adjusted.
max_rate - Specifies the maximum rate at which the above specified class will be allowed to transmit packets.
TX Rate Effective RX
(Kbit/sec) (Kbit/sec)
---------- ----------------
64 No Limit
64 No Limit
64 No Limit
64 No Limit
64 No Limit
64 No Limit
64 No Limit
64 No Limit
64 No Limit
64 No Limit
Effective TX
(Kbit/sec)
----------------
64
64
64
64
64
64
64
64
64
64
489