D-Link DGS-1510/ME Series Reference Manual page 412

DGS-1510/ME Series Metro Ethernet Switch CLI Reference Guide
DGS-1510-28XMP/ME:admin# show max_mcast_group ports 1-2
Command: show max_mcast_group ports 1-2
Port Max Multicast Group Number
------ ----------------------------
1 100
2 Infinite
Total Entries: 2
DGS-1510-28XMP/ME:admin#
To display the maximum number of multicast groups that VLANs 1 and 2 can join:
DGS-1510-28XMP/ME:admin# show max_mcast_group vlanid 1-2
Command: show max_mcast_group vlanid 1-2
VLAN Max Multicast Group Number
------ ----------------------------
1 Infinite
2 10
Total Entries: 2
DGS-1510-28XMP/ME:admin#
47-9 show limited_multicast_addr
Description
This command is used to display the multicast address range by port or by VLAN.
When the function is configured on a port, it limits the multicast groups operated by the IGMP or MLD snooping
function and layer 3 functions. When the function is configured on a VLAN, it limits the multicast groups operated
by the IGMP or MLD layer 3 functions.
If the IPv4 or IPv6 option is not specified, IPv4 is implied.
Format
show limited_multicast_addr [ports <portlist> | vlanid <vlanid_list>] {[ipv4 | ipv6]}
Parameters
ports - Specifies the range of ports that require information displaying about the multicast address filtering
function.
<portlist> - Enter the list of ports to be configured here.
vlanid - Specifies the VLAN ID of VLANs that require information displaying about the multicast address filtering
function.
<vlanid_list> - Enter the VLAN ID list here.
ipv4 - (Optional) Specifies to display the IPv4 multicast profile associated with the port.
ipv6 - (Optional) Specifies to display the IPv6 multicast profile associated with the port.
Action
---------
Drop
Drop
Action
---------
Drop
Drop
408