D-Link DGS-1510/ME Series Reference Manual page 85

DGS-1510/ME Series Metro Ethernet Switch CLI Reference Guide
6-4 show access_profile
Description
This command is used to display the current access list table.
Format
show access_profile {[profile_id <value 1-512> | profile_name <name 32>]}
Parameters
profile_id - (Optional) Specifies the index of the access list profile.
<value 1-512> - Enter the profile ID used here. This value must be between 1 and 512.
profile_name - (Optional) Specifies the name of the profile.
<name 32> - Enter the profile name used here. This name can be up to 32 characters long.
Restrictions
None.
Example
To display the current access list table:
DGS-1510-28XMP/ME:admin#show access_profile
Command: show access_profile
Access Profile Table
Total User Set Rule Entries : 1
Total Used HW Entries
Total Available HW Entries
================================================================================
Profile ID: 1
MASK on
VLAN
Source MAC
Destination MAC : 00-00-00-00-00-02
802.1p
Ethernet Type
Available HW Entries : 66
================================================================================
================================================================================
Profile ID: 2
CTRL+C ESC q Quit
The following example displays an access profile that supports an entry mask for each rule:
: 125
: 899
Profile name: t1 Type: Ethernet
: 0xFFF
: 00-00-00-00-00-01
Profile name: 2 Type: IPv4
SPACE n Next Page ENTER Next Entry a All
81