D-Link DGS-1510/ME Series Reference Manual page 572

DGS-1510/ME Series Metro Ethernet Switch CLI Reference Guide
DGS-1510-28LP/ME:admin#show sim neighbor
Command: show sim neighbor
Neighbor Info Table
Port MAC Address
------ ------------------ ---------
19 00-01-02-03-B4-00
23 00-01-02-03-E4-00
Total Entries: 4
DGS-1510-28LP/ME:admin#
68-4 reconfig
Description
This command is used to re-telnet to member.
Format
reconfig {member_id <value 1-32> | exit}
Parameters
member_id - (Optional) Specifies the serial number of the member.
<value 1-32> - Enter the serial number of the member here.
exit - (Optional) Specifies to exit from the telnet session.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To re-telnet to member:
DGS-1510-28XMP/ME:admin# reconfig member_id 1
Command: reconfig member_id 1
DGS-1510-28XMP/ME:admin#
Login:
68-5 config sim_group
Description
This command is used to configure group information.
Role
Commander
Candidate
568