Trace Route; Trace Ipv4 Route - D-Link xStack DGS-3400 Series Reference Manual
Web ui reference guide for layer 2+ managed gigabit ethernet switch
Hide thumbs
Also See for xStack DGS-3400 Series:
- Reference manual (629 pages) ,
- Cli reference manual (540 pages) ,
- Cli manual (463 pages)
Table of Contents
Advertisement
x Stack
The functions are used in the MAC address table:
Parameter
Description
VLAN Name
Enter a VLAN Name to be browsed by or to be deleted.
VID List
Enter a list of VLAN ID to be browsed by or to be deleted.
IP Address
Enter a IP address to be browsed by or to be deleted.
To search for MLD snooping data driven group, click Find. To view all entries, click View All Entries. To delete an entry, enter
the information and click Clear. To remove all entries, click Clear All Entries.
Trace Route
The following window will aid the user in back tracing the route taken by a packet before arriving at the Switch. When initiated,
the Trace Route program will display the IP addresses of the previous hops a packet takes from the Target IP Address entered in
the window, until it reaches the Switch.
Trace IPv4 Route
To view this window, click Monitoring > Trace Route > Trace IPv4 Route, as shown below.
The following parameter can be configured:
Parameter
Description
Target IP Address
Click the radio button to enter the IP address of the computer to be traced.
®
DGS-3400 Series Layer 2 Gigabit Ethernet M anaged Sw itch
Figure 7 - 35 Trace IPv4 Route window
400
Advertisement
Table of Contents
