D-Link DGS-1510/ME Series Reference Manual page 276

DGS-1510/ME Series Metro Ethernet Switch CLI Reference Guide
31-20 show router_ports
Description
This command is used to display the currently configured router ports on the Switch.
Format
show router_ports [vlan <vlan_name 32> | vlanid <vlanid_list> | all ] {[static | dynamic | forbidden]}
Parameters
vlan - Specifies the name of the VLAN on which the router port resides.
<vlan_name 32> - Enter the VLAN name here. The VLAN name can be up to 32 characters long.
vlanid - Specifies the ID of the VLAN on which the router port resides.
<vlanid_list> - Enter the VLAN ID list here.
all - Specifies all VLANs on which the router port resides.
static - (Optional) Displays router ports that have been statically configured.
dynamic - (Optional) Displays router ports that have been dynamically configured.
forbidden - (Optional) Displays forbidden router ports that have been statically configured.
If no parameter is specified, the system will display all currently configured router ports on the Switch.
Restrictions
None.
Example
To display router ports:
DGS-1510-28XMP/ME:admin# show router_ports all
Command: show router_ports all
VLAN Name
Static Router Port
Dynamic Router Port
Router IP
Forbidden router port
VLAN Name
Static router port
Dynamic router port
Router IP
Forbidden router port
Total Entries : 2
DGS-1510-28XMP/ME:admin#
: default
: 1-10
:
: 10.0.0.1, 10.0.0.2, 10.0.0.3
:
: vlan2
:
: 13
: 10.0.0.4, 10.0.0.5, 10.0.0.6
:
272