D-Link DGS-1510/ME Series Reference Manual page 386

DGS-1510/ME Series Metro Ethernet Switch CLI Reference Guide
To show MLD snooping data driven groups:
DGS-1510-28XMP/ME:admin# show mld_snooping group data_driven
Command: show mld_snooping group data_driven
Source/Group
VLAN Name/VID
Member Ports
Router Ports
UP Time
Expiry Time
Filter Mode
Total Entries: 1
DGS-1510-28XMP/ME:admin#
45-9 show mld_snooping forwarding
Description
This command is used to display the Switch's current MLD snooping forwarding table. It provides an easy way for
users to check the list of ports that the multicast group that comes from specific sources will be forwarded to. The
packet comes from the source VLAN. They will be forwarded to the forwarding VLAN.
Format
show mld_snooping forwarding {[vlan <vlan_name 32> | vlanid <vlanid_list>]}
Parameters
vlan - (Optional) Specifies the name of the VLAN for which you want to view MLD snooping forwarding table
information.
<vlan_name 32> - Enter the VLAN name here. The VLAN name can be up to 32 characters long.
vlanid - (Optional) Specifies the ID of the VLAN for which you want to view MLD snooping forwarding table
information.
<vlanid_list> - Enter the VLAN ID list here.
If no parameter is specified, the system will display all current MLD snooping forwarding table entries of the
Switch.
Restrictions
None.
Example
To show all MLD snooping forwarding entries located on the Switch.
: NULL/FF13::1
: v103/103
:
: 8
: 97
: 163
: EXCLUDE
382