D-Link DGS-1510/ME Series Reference Manual page 20

DGS-1510/ME Series Metro Ethernet Switch CLI Reference Guide
Format
config greeting_message {default}
Parameters
default - (Optional) Specifies to return the greeting message (banner) to its original factory default entry.
Restrictions
Only Administrators and Operators can issue this command.
Example
To edit the banner:
DGS-1510-28XMP/ME:admin#config greeting_message
Command: config greeting_message
Greeting Messages Editor
================================================================================
Copyright(C) 2015 D-Link Corporation. All rights reserved.
================================================================================
<Function Key>
Ctrl+C Quit without save
Ctrl+W Save and quit
-------------------------------------------------------------------------------
2-13 show greeting_message
Description
The command is used to display greeting message.
Format
show greeting_message
Parameters
None.
DGS-1510-28XMP/ME Gigabit Ethernet Switch
Command Line Interface
Firmware: Build 1.00.018
<Control Key>
left/right/
Ctrl+D
Ctrl+X
Ctrl+L
up/down Move cursor
Delete line
Erase all setting
Reload original setting
16