D-Link DGS-1510/ME Series Reference Manual page 480

DGS-1510/ME Series Metro Ethernet Switch CLI Reference Guide
DGS-1510-28XMP/ME:admin# show dot1v_protocol_group group_id 10
Command: show dot1v_protocol_group group_id 10
Protocol Group ID Protocol Group Name
----------------- -------------------------------- -------------- --------------
10
Total Entries: 1
DGS-1510-28XMP/ME:admin#
58-5 config port dot1v
Description
This command is used to assign the VLAN for untagged packets ingress from the port list based on the protocol
group configured. This assignment can be removed by using the delete protocol_group parameter.
When priority is not specified in the command, the port default priority will be the priority for those untagged
packets classified by the protocol VLAN.
Format
config port dot1v ports [<portlist> | all] [add protocol_group [group_id <id> | group_name <name 32>]
[vlan <vlan_name 32> | vlanid <id>] {priority <value 0-7>} | delete protocol_group [group_id <id> | all]]
Parameters
<portlist> - Enter a list of ports used for the configuration here.
all - Specifies that all the ports will be used for this configuration.
add - Specifies that the group specified will be added.
protocol_group - Specifies that parameters for the group will follow.
group_id - Specifies the group ID of the protocol group.
<id> - Enter the group ID used here.
group_name - Specifies the name of the protocol group.
<name 32> - Enter the name of the group used here. This name can be up to 32 characters long.
vlan - The VLAN that is to be associated with this protocol group on this port.
<vlan_name 32> - Enter the name of the VLAN here. This name can be up to 32 characters long.
vlanid - Specifies the VLAN ID.
<id> - Enter the VLAN ID used here.
priority - (Optional) Specifies the priority to be associated with the packet which has been classified to the
specified VLAN by the protocol.
<value 0-7> - Enter the priority value here. This value must be between 0 and 7.
delete - Specifies that the group specified will be deleted.
protocol_group - Specifies that parameters for the group will follow.
group_id - Specifies the group ID of the protocol group.
<id> - Enter the group ID used here.
all - Specifies that all the groups will be deleted.
General_Group
Frame Type
EthernetII
476
Protocol Value
86DD