D-Link DGS-1510/ME Series Reference Manual page 434

DGS-1510/ME Series Metro Ethernet Switch CLI Reference Guide
false - Specifies that the port(s) is in Half-Duplex mode.
auto - Specifies that the port(s) is in Full-Duplex and Half-Duplex mode.
state - (Optional) Specifies whether this port supports the STP functionality.
enable - Specifies that STP functionality on the port(s) is enabled.
disable - Specifies that STP functionality on the port(s) is disabled.
restricted_role - (Optional) Specifies whether this port not to be selected as Root Port. The default value is false.
true - Specifies that the port can be specified as the root port.
false - Specifies that the port cannot be specified as the root port.
restricted_tcn - (Optional) Specifies whether this port not to propagate topology change. The default value is
false.
true - Specifies that the port can be set to propagate a topology change.
false - Specifies that the port cannot be set to propagate a topology change.
fbpdu - (Optional) Specifies whether this port will flood STP BPDU when STP functionality is disabled. When the
state is set to enable, the received BPDU will be forwarded. When the state is set to disable, the received
BPDU will be dropped.
enable - Specifies that the port can be set to flood the STP BPDU when the STP functionality is disabled.
disable - Specifies that the port cannot be set to flood the STP BPDU when the STP functionality is disabled.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To configure STP ports:
DGS-1510-28XMP/ME:admin# config stp ports 1 externalCost auto
Command: config stp ports 1 externalCost auto
Success.
DGS-1510-28XMP/ME:admin#
49-12 show stp ports
Description
This command is used to show the port information includes parameters setting and operational value.
Format
show stp ports {<portlist>}
Parameters
<portlist> - (Optional) Enter a list of ports used for the configuration here.
Restrictions
None.
430