Power Window Regulator Removal/Installation - Mazda RX-8 Manual

5. Remove the bolts.
6. Remove the rear door glass.
7. Install in the reverse order of removal.
WINDOW REGULATOR

POWER WINDOW REGULATOR REMOVAL/INSTALLATION

1. Disconnect the negative battery cable.
2. Remove the following parts:
a. Inner garnish (See INNER GARNISH REMOVAL/INSTALLATION .)
b. Front door trim (See FRONT DOOR TRIM REMOVAL/INSTALLATION .)
c. Front door speaker (See FRONT DOOR SPEAKER REMOVAL/INSTALLATION .)
d. Front door glass (See FRONT DOOR GLASS REMOVAL/INSTALLATION .)
e. Power window motor (See POWER WINDOW MOTOR REMOVAL/INSTALLATION .)
3. Remove the nuts.
4. Insert hand through the front speaker installation hole, rotate the drum housing in the direction shown in
the figure and remove the drum housing from the door unit connection tabs.
(w) RX-8 Body
Page 95