Viewing or updating the DHCP address using the serial console cable
Viewing or updating the DHCP address using the serial console cable
Procedure
Procedure
1. Access the System Utilities menu .
2. For iLO 4, navigate through the menu options System Configuration
Enter. The Network Autoconfiguration
Enter
Network Autoconfiguration screen displays.
For iLO 5, navigate through the menu options System Configuration
Enter. The Network Autoconfiguration
Enter
Network Autoconfiguration screen displays.
3. View or update the DHCP settings.
4. To save any changes, press the F10
5. After saving all settings, iLO prompts for a reset in order for any new settings to be used. Reset the system.
System Configuration > iLO 4 Configuration Utility
System Configuration > iLO 5 Configuration Utility
F10 key.
Viewing or updating the DHCP address using the serial console cable
iLO 4 Configuration Utility > Network
iLO 5 Configuration Utility > Network
Network > DNS/DHCP
DNS/DHCP, and press
Network > DNS/DHCP
DNS/DHCP, and press
88