Table of Contents
Advertisement
8 Access and configuration
94
Menu
WLAN
Bridges
HotSpot Gateway
QoS
OSPF
PIM
SNMP Browser
If you select the
all internal system MIB tables and can modify the saved values. This view is only provided
for professional configuration and extended monitoring.
SNMP (Simple Network Management Protocol) is a protocol that allows access for config-
uring your device. All configuration parameters are stored in the MIB (Management Inform-
ation Base) in the form of MIB tables and MIB variables. You can read and modify these
directly via the SNMP browser.
Caution
This configuration method assumes an in-depth system knowledge of Funkwerk
devices!
8.3.2 SNMP shell
SNMP (Simple Network Management Protocol) is a protocol that defines how you can ac-
cess the configuration settings.
All configuration settings are stored in the MIB (Management Information Base) in the form
of MIB tables and MIB variables. You can access these directly from the SNMP shell via
SNMP commands. This type of configuration requires a detailed knowledge of our devices.
Funkwerk Enterprise Communications GmbH
Function
This menu shows you the WLAN connections statistics.
In this menu you can view the current values of the configured
bridges.
This menu shows a list of all bintec Hotspot users.
In this menu, statistics are displayed for all interfaces for which
QoS has been configured.
In this menu, the status and statistics are displayed for all inter-
faces for which OSPF has been configured.
In this menu, the status for all interfaces for which PIM has been
configured is displayed.
under View in the header, you will see an HTML view of
R1xxx/R3xxx/R4xxx
Advertisement
Table of Contents
