Table of Contents
Advertisement
17 WAN
260
Field
Connection Idle
Timeout
Fields in the AUXIP Mode and Routes menu
Field
IP Address Mode
Default Route
Create NAT Policy
Funkwerk Enterprise Communications GmbH
Description
The function is enabled with
The function is disabled by default.
Only activate this option if you have Internet access with a flat-
rate charge.
Only if Always on is disabled.
Enter the idle time in seconds for static short hold. The static
short hold setting determines how many seconds should pass
between sending the last traffic data packet and clearing the
connection.
Possible values are
to
short hold.
The default value is
.
Description
Select whether your device is to be assigned a static IP address
or whether it should be assigned this dynamically or whether it
should be assigned this dynamically at the remote terminal.
Possible values:
•
(default value): Your device is dynamically
assigned an IP address.
•
: You enter a static IP address.
•
IP address to the remote terminal.
Select whether the route to this connection partner is to be
defined as the default route.
The function is enabled with
The function is enabled by default.
Specify whether Network Address Translation (NAT) is to be ac-
tivated.
The function is enabled with
.
(seconds).
deactivates the
: Your device dynamically assigns an
.
.
R1xxx/R3xxx/R4xxx
Advertisement
Table of Contents
