Table of Contents
Advertisement
Funkwerk Enterprise Communications GmbH
R1xxx/R3xxx/R4xxx
Access data
User account (12 digits)
T-Online number (usually 12 digits)
Joint user account
Note
To configure T-Online Internet access, in the User Name field, enter the following suc-
cession of numbers without intervening spaces:
User account (12 digits) + T-Online number (usually 12 digits) + co-user number (for
the main user, always 0001).
If your T-Online number is less than 12 digits long, a "#" character is required between
the T-Online number and the co-user number.
If you use T-DSL, you must add the character string "@t-online.de" at the end of this
string of numbers.
You username could, for example, look like this:
00012345678906112345678#0001@t-online.de
Wireless LAN (only for bintec R1200w, bintec R1200wu and bintec R3000w)
You can operate your device as an access point and therefore connect individual work sta-
tions (e.g. laptops, PCs with wireless card or wireless adapter) by wireless connections to
your local network via WLAN (Wireless LAN) and let them communicate with each other.
The table "Data for the Wireless LAN configuration" shows the information required.
As data can be transmitted over the air in the WLAN, this data can in theory be intercepted
and read by any attacker with the appropriate resources. Particular attention must therefore
be paid to protecting the wireless connection.
Note the following:
• Follow the safety precautions when configuring your WLAN.
• Please also read the information on WLAN operation published by the Federal Office for
Information Security, see
Data for the Wireless LAN configuration
Access data
Preshared key for WPA-PSK
Example value
http://www.bsi.bund.de
.
Example value
without default
4 Basic configuration
Your values
Your values
15
Advertisement
Table of Contents
