Table of Contents
Advertisement
Funkwerk Enterprise Communications GmbH
R1xxx/R3xxx/R4xxx
Field
LCP Alive Check
Callback Mode
Description
The function is disabled by default.
Check whether the reachability of the remote terminal is to be
checked by sending LCP echo requests or replies. This makes
it possible to switch to a backup connection more quickly in the
event of line faults.
The function is enabled with
The function is disabled by default.
Select the Callback Mode function.
Possible values:
•
(default value): Your device does not call back.
•
: Select one of the following options:
•
partner to request a callback.
•
partner to request a callback via CBCP (Callback Control
Protocol). Needed for Windows clients.
•
: Select one of the following options:
•
mediately when requested to do so by the connection part-
ner.
•
period of time proposed by the Microsoft client (NT: 10
seconds, new systems: 12 seconds. It uses the call number
(Entries->Number) with the Mode
entered for the connection partner. If no number is entered,
the required number can be reported by the caller in a PPP
negotiation. This setting should be avoided where possible
for security reasons. Currently cannot be avoided for the
connection of mobile Microsoft clients via DCN.
•
prox. four seconds if your device is requested to do so by
the connection partner. Only makes sense for CLID.
•
This setting should be avoided for security reasons. The Mi-
.
: Your device calls the connection
: Your device calls the connection
: Your device calls back im-
: Your device calls back after a
or
: Your device calls back after ap-
with the option of termination.
17 WAN
,
: Like
263
Advertisement
Table of Contents
