Page 2
Liability While every effort has been made to ensure the accuracy of all information in this manual, Funkwerk Enterprise Communications GmbH cannot assume liability to any party for any loss or damage caused by errors or omissions or by statements of any kind in this document and is only liable within the scope of its terms of sale and delivery.
Page 3
Updating Software ........3 The Command "update"...
Every new system software version brings new features, enhanced perfor- mance, and solves problems that may have occurred with earlier releases. You will find up-to-date system software at www.funkwerk-ec.com. Here you can also find the most recent documentation for your gateway.
Updating Software The bintec home page opens. In the download section of your gateway, you will find the latest software and documentation. Save the current system software, e.g. R232bw-s7204.sx6, in a directory on your PC. You can leave the file name as it is. Activate a TFTP server on your PC.
Page 7
Updating Software update which directly saves the system software to the Flash ROM in in- dividual segments. Software integrity is not verified during this kind of up- date. Proceed as follows: If insufficient memory is available, the following prompt is displayed in the SNMP shell: Do you want to perform an incremental update (y or n)? 1.
Press <sp> for boot monitor or any other key to boot system R232aw Bootmonitor V.7.2 Rev. 4 from 2005/09/06 00:00:00 Copyright (c) 1996-2005 by Funkwerk Enterprise Communications GmbH (1) Boot System (2) Software Update via TFTP...
Page 10
BOOT Sequence Software update via XMODEM: The gateway performs a software update over a serial interface with XMO- DEM. Delete configuration: The gateway is reset to the unconfigured ex works state. All configuration files are deleted and the BOOTmonitor settings are set to the default val- ues.