Table of Contents
Advertisement
Funkwerk Enterprise Communications GmbH
R1xxx/R3xxx/R4xxx
Funkwerk Configuration Interface
Fig. 32:
8.3.1.1 Calling the Funkwerk Configuration Interface
(1) Check whether the device is connected and switched on and that all the necessary
cables are correctly connected (see
(2) Check the settings of the PC from which you want to configure your device (see
figuring a PC
on page 16).
(3) Open a web browser.
(4) Enter
(5) Enter
in the User field and
You are not in the status menu of your device's Funkwerk Configuration Interface (see
Status
on page 98).
Initial Screen
Setting up and connecting
in the address field of the web browser.
in the Password field and click LOGIN.
8 Access and configuration
on page 6).
Con-
79
Advertisement
Table of Contents
