Funkwerk Bintec R41000 Reference page 103

Funkwerk Enterprise Communications GmbH
R1xxx/R3xxx/R4xxx
Menu
Ethernet Ports
ISDN Ports
ADSL Modem
SHDSL
Serial Ports
UMTS
LAN
Menu
IP Configuration
VLAN
Wireless LAN (only bintec R1200w, R1200wu and R3000w)
Function
In this menu, you configure the Ethernet interfaces of your
device. To do this, you select the speed and type of interface,
for example.
In this menu, you configure the ISDN interface of your device.
Here you enter data such as the type of ISDN connection to
which your device is connected.
Only R3000 and R3000w.
In this menu, you configure the ADSL interface of your device.
Here you specify whether Annex A or Annex B is used as ADSL
mode for the broadband connection.
Only R3400 and R3800w.
In this menu, you configure the SHDSL interface of your device.
Here you enter how many change pairs are used for the SHDSL
connection.
Only R4300.
In this menu you can configure the serial WAN interface(s) for
your device, i.e. one or two integrated X.21/V.35 interfaces de-
pending on the licence. Here you enter which clock rate is used
for the connection.
Only R1200wu.
In this menu, you configure the CardBus interface of your
device. Here you specify that UMTS is enabled.
Function
In this menu, you carry out the IP configuration of the LAN inter-
faces for your device.
In this menu, you configure the VLANs.
8 Access and configuration
89