Table of Contents
Advertisement
Funkwerk Enterprise Communications GmbH
R1xxx/R3xxx/R4xxx
The menu Networking->Load Balancing->Load Balancing Groups->New consists of the
following fields:
Fields in the Load Balancing GroupsBasic Parameters menu
Field
Group Description
Distribution Policy
Consider
Distribution Mode
Description
Enter the desired description of the interface group.
Select the way the data traffic is to be distributed to the inter-
faces configured for the group.
Possible values:
•
sion is assigned to one of the group interfaces according to
the percentage assignment of sessions to the interfaces. The
number of sessions is decisive.
•
assigned to one of the group interfaces according to the share
of the total data rate handled by the interfaces. The current
data rate based on the data traffic is decisive in both the send
and receive direction.
Only for Distribution Policy =
Choose the direction in which the current data rate is to be con-
sidered.
Options:
•
: Only the data rate in the receive direction is con-
sidered.
•
: Only the data rate in the send direction is con-
sidered.
By default, the
Select the state the interfaces in the group may have if they are
to be included in load balancing.
Possible values:
•
(default value): Also includes idle interfaces.
•
state are included.
(default value): A newly added ses-
: A newly added session is
and
options are disabled.
: Only interfaces in the up
14 Networking
193
Advertisement
Table of Contents
