Table of Contents
Advertisement
Funkwerk Enterprise Communications GmbH
R1xxx/R3xxx/R4xxx
Fields in the SHDSLSHDSL Parameters menu
Field
ATM Interface
Device Mode
SHDSL Type
Clock Rate
Wire Mode
Description
Displays the name of the ATM interface.
Define the role within the connection.
Possible values:
•
Mode for the user page of the SHDSL connection.
•
SHDSL connection.
Note: CPE on the one hand and CO on the other hand must al-
ways be set for each SHDSL connection. Likewise, all wire pairs
have to be set to the same mode, mixed operation is not pos-
sible.
Define which Annex of ITU-T Recommendation G.991.2 is used
for the connection.
Possible values:
•
: For applications in North America
(provider-dependent) for example.
•
(default value): For applications in Europe
(provider-dependent) for example.
Define whether the clock rate should be negotiated.
Possible values:
•
: The clock rate is predefined.
•
(default value): The clock rate is negotiated de-
pending on the line quality.
Note that in order to use the IMA mode (see Wire Mode), a
fixed value has to be configured at least on one side (CO or
CPE).
Define the number and combination of wires (depending on the
device type) used for the SHDSL connection.
Possible values:
11 Physical Interfaces
(default value):
: Mode for the provider page of the
141
Advertisement
Table of Contents
