Table of Contents
Advertisement
17 WAN
240
17.1.1.1 New
Choose the New button to set up new PPPoE interfaces.
The menu WAN->Internet + Dialup->PPPoE->New consists of the following fields:
Fields in the PPPoEBasic Parameters menu
Field
Description
PPPoE Mode
PPPoE Ethernet Inter-
face
PPPoE Interfaces for
Multilink
Funkwerk Enterprise Communications GmbH
Description
Enter a name to uniquely identify the PPPoE partner. The first
character in this field must not be a number No special charac-
ters or umlauts must be used.
Select whether you want to use a standard Internet connection
over PPPoE (
), or whether your Internet access is to
be set up over several interfaces (
, you can combine several DSL connections from a
provider over PPP as a static bundle in order to obtain more
bandwidth. Each of these DSL connections should use a separ-
ate Ethernet connection for this. At the moment, many providers
are still in the process of preparing the PPPoE Multilink function.
For PPPoE Multilink, we recommend using your device's Ether-
net switch in Split-Port mode and to use a separate Ethernet in-
terface e.g.
,
If you also want to use an external modem for PPPoE Multilink,
you must run your device's Ethernet switch in Split-Port mode.
Only for PPPoE Mode =
Select the Ethernet interface specified for a standard PPPoE
connection.
If you want to use an external DSL modem, select the Ethernet
port to which the modem is connected.
When using the internal DSL modem, select here the EthoA in-
terface configured in Physical
Interfaces->ATM->Profiles->New
Only for PPPoE Mode =
Select the interfaces you want to use for your Internet connec-
tion. Click the Add button to create new entries.
). If you choose
for each PPPoE connection.
R1xxx/R3xxx/R4xxx
Advertisement
Table of Contents
