Table of Contents
Advertisement
14 Networking
182
Field
Fields in the IP RoutesRoute Parameters menu
Field
Route Type
Destination IP Ad-
dress/NetmaskDestina-
tion IP Address/Net-
mask
Interface
Network Type
Local IP Address
Funkwerk Enterprise Communications GmbH
Description
The function is activated by selecting
The function is disabled by default.
Description
Select the type of route.
Possible values:
•
(default value): Route to a network.
•
: Is used if no other suitable route is avail-
able.
•
: Route to a single host.
Only for Route Type
Enter the IP address of the destination host.
In Route Type =
corresponding netmask in the second field. If no entry is made,
your device uses a default netmask.
If necessary, enter the interface to be used for this route.
Not for Route Type =
Also select the network type.
Possible values:
•
(default value):
• in the LAN: You define another IP address for the interface.
• in the WAN: You define a route without a transit network.
•
:
• in the LAN: You define a gateway route.
• in the WAN: You define a route with a transit network.
Only for Network Type =
Enter the IP address of the gateway to which your device is to
.
or
, you additionally enter the
R1xxx/R3xxx/R4xxx
Advertisement
Table of Contents
