Table of Contents
Advertisement
Funkwerk Enterprise Communications GmbH
R1xxx/R3xxx/R4xxx
Field
Source Port
Source Port/Range
Original Destination IP
Address/Netmask
Original Destination
Port/Range
In the NAT Configuration ->Replacement Values menu you can define, depending on
whether you're dealing with inbound or outbound data traffic, new addresses and ports, to
which specific addresses and ports from the NAT Configuration ->Specify original traffic
menu can be translated.
Fields in the NAT ConfigurationReplacement Values menu
Field
New Destination IP Ad-
dress/Netmask
New Destination Port
New Source IP Ad-
dress/Netmask
Description
Only for Type of traffic =
method =
and Service =
the source port of the original data packets. The default setting
means that the port remains unspecified.
Not for Type of traffic =
source port or the source port range of the original data pack-
ets. The default setting
specified.
Enter the destination IP address and corresponding netmask of
the original data packets, as the case arises.
Only for Service =
Enter the destination port or the destination port range of the
original data packets. The default setting All means that the port
is not specified.
Description
Only for Type of traffic =
Enter the destination IP address and corresponding netmask to
which the original destination IP address is to be translated.
Only for Type of traffic =
Leave the destination port as it appears or enter the destination
port to which the original destination port is to be translated.
Selecting
leaves the original destination port. If you
disable
, an input field appears in which you can
enter a new destination port.
is active by default.
Only for Type of traffic =
, NAT
. Enter
Enter the
means that the port remains un-
.
.
14 Networking
.
.
191
Advertisement
Table of Contents
