Funkwerk Bintec R41000 Reference page 315

Bintec r1xxx/r3xxx/r4xxx gateways reference manual
Table of Contents

Advertisement

Funkwerk Enterprise Communications GmbH
R1xxx/R3xxx/R4xxx
Field
Incoming Phone Num-
ber
Outgoing Phone Num-
ber
Transfer own IP ad-
dress over ISDN/GSM
Transfer Mode
Description
device to cause this to set up an IPSec tunnel. The device
does not react to incoming ISDN calls.
: Your device can react to incoming ISDN calls and send
ISDN calls to the remote device. The setting up of an IPSec
tunnel is executed (after an incoming ISDN call) and initiated
(by an outgoing ISDN call).
Only for Mode =
Enter the ISDN number from which the remote device calls the
local device (calling party number). Wildcards may also be
used.
Only for Mode =
Enter the ISDN number with which the local device calls the re-
mote device calls (called party number). Wildcards may also be
used.
Select whether the IP address of your own device is to be trans-
ferred over ISDN for IPSec callback.
The function is enabled with
The function is disabled by default.
Only for Transfer own IP address over ISDN/GSM = enabled
Select the mode in which your device is to attempt to transfer its
IP address to the peer.
Possible values:
termines the most favourable mode. It first tries all D channel
modes before switching to the B channel. (Costs are incurred
for using the B channel.)
matically determines the most favourable D channel mode.
The use of the B channel is excluded.
transfer the IP address in the mode set in the Mode field.
or
.
or
.
.
: Your device automatically de-
: Your device auto-
: Your device tries to
18 VPN
289

Advertisement

Table of Contents
loading

Table of Contents