Table of Contents
Advertisement
Funkwerk Enterprise Communications GmbH
R1xxx/R3xxx/R4xxx
Field
Local IP Address
Route Entries
IP Assignment Pool
The menu Advanced Settings consists of the following fields:
Fields in the Advanced Settings menu
Field
Block after connection
failure for
Maximum Number of
Dialup Retries
Usage Type
Description
The function is enabled by default.
Only if IP Address Mode =
Enter the static IP address of the connection partner.
Only if IP Address Mode =
Define other routing entries for this connection partner.
Add new entries with Add.
•
: IP address of the destination host or
network.
•
: Netmask for Remote IP Address. If no entry is
made, your device uses a default netmask.
•
: The lower the value, the higher the priority of the
route (possible values ...
Only if IP Address Mode =
Select IP pools configured in the WAN->Internet + Dialup->IP
Pools menu. If an IP pool has not been configured here yet, the
message
Description
Enter the wait time in seconds before the device should try
again after an attempt to set up a connection has failed.
The default value is
.
Enter the number of unsuccessful attempts to setup a connec-
tion before the interface is blocked.
Possible values are
to
The default value is .
If necessary, select a special interface use.
). The default value is .
appears in this field.
.
17 WAN
261
Advertisement
Table of Contents
